Instruction manual

9-7
9.3.2 Sharing Settings Between Channels
The EQUAL TO CH 1 is used to make the setting of CH 2 through CH 4, respectively,
equal to the setting of CH 1. (The CH 2 through CH 4 should be set respectively.)
The EQUAL TO CH 5 is used to equal the setting of CH 6 through CH 8 to CH 5.
The EQUAL TO CH 9 is used to equal the setting of CH 10 through CH 12 to CH 9.
The EQUAL TO CH 13 is used to equal the setting of CH 14 through CH 16 to CH 13.
This section only describes the setting procedure of EQUAL TO CH 1 used to equal the
setting of CH 2 to CH 1, however, the same procedure can also be applied to EQUAL TO
CH 5, EQUAL TO CH 9, and EQUAL TO CH 13.
● Description of Setting Items
ON: Equals the setting of CH 2 to CH 1.
The display contents of the CH 2 will not be changed; displayed as is.
OFF: The CH 1 and CH 2 do not share the settings. (initial setting)
● Sharing Procedure of Settings Between Channels
Display the CH SELECT by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
２．ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
v ＧＲＯＵＰ １ ＳＥＴ
３．ＧＲＯＵＰ １ ＳＥＴ
t ＣＨ ＳＥＬＥＣＴ
４．ＣＨ ＳＥＬＥＣＴ
v ＧＲＯＵＰ １ ＣＨ２
Press the ENTER key.
Select the group of channels to share the settings by using the
[5] and [6] keys.
Display the EMBEDDED AUDIO by using the [5] and [6]
keys.
Select the channel to share the settings by using the [5] and
[6] keys.
５．ＧＲＯＵＰ １ ＣＨ２
u ＥＱＵＡＬ ＴＯ ＣＨ１
Display the EQUAL TO CH1 by using the [5] and [6] keys.
Press the ENTER key.
６．ＥＱＵＡＬ ＴＯ ＣＨ１（ＣＨ２）
■ＯＮ □ＯＦＦ
Select the ON by using the [3] and [4] keys.
Select the OFF not to share the settings.
Press the ENTER key.
５．ＧＲＯＵＰ １ ＣＨ２
u ＥＱＵＡＬ ＴＯ ＣＨ１
Press the ENTER key. Press the MENU key to cancel.