Instruction manual

9-6
9.3.1 Sharing Settings Between Groups
The EQUAL TO G1 is used to equal the setting of GROUP 2 to GROUP 1.
The EQUAL TO G3 is used to equal the setting of GROUP 4 to GROUP 3.
The settings described in Section 9.3.3, "Audio Signal ON/OFF (in each group)" cannot
be applied to this setting.
This section only describes the setting procedure of EQUAL TO G1 used to equal the
setting of GROUP 2 to GROUP 1. This procedure can also be applied to EQUAL TO G3.
● Description of Setting Items
ON Equals the setting of GROUP 2 to GROUP 1. The display contents of
the GROUP 2 will not be changed; displayed as is.
OFF The GROUP 1 and GROUP 2 do not share the settings. (initial setting)
● Sharing Procedure of Settings Between Groups
Select the group to share the settings by using the [5] and
[6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
２．ＥＭＢＥＤＤＥＤ ＡＵＤＩＯ
v ＧＲＯＵＰ ２ ＳＥＴ
３．ＧＲＯＵＰ ２ ＳＥＴ
u ＥＱＵＡＬ ＴＯ Ｇ１
Display the EMBEDDED AUDIO by using the [5] and [6]
keys.
４．ＥＱＵＡＬ ＴＯ Ｇ１ （Ｇ２）
■ＯＮ □ＯＦＦ
Press the ENTER key. Press the MENU key to cancel.
Display the EQUAL TO G1 by using the [5] and [6] keys.
Select the ON by using the [3] and [4] keys.
Select the OFF not to share the settings.
３．ＧＲＯＵＰ ２ ＳＥＴ
u ＥＱＵＡＬ ＴＯ Ｇ１
Press the ENTER key.