Instruction manual

9-5
9.3 Setting Embedded Audio
The EMBEDDED AUDIO is used to set the embedded audio for CH 1 to CH 16.
The embedded audio can be set for each group or for each channel.
● Setting Each Group Respectively
The CH 1 to CH 4 are assigned to GROUP 1. Also assign remaining channels to
GROUP 2 to GROUP 4 as listed in Table 9-2.
Table 9-2 Relationship between the channel number and group number for
Embedded Audio.
Channel Number Group Number
CH 1 to CH 4 GROUP1
CH 5 to CH 8 GROUP2
CH 9 to CH12 GROUP3
CH13 to CH16 GROUP4
The same procedure used to equal the setting of GROUP 2 to GROUP 1 can also be
applied to equal the setting of GROUP 4 to GROUP 3.
Refer to Section 9.3.1, "Sharing Settings Between Groups".
● Setting Each Channel Respectively
Set each channel, CH 1 to CH 16
The CH 2 to CH 4 can be set to equal the CH 1.
The CH 6 to CH 8 can be set to equal the CH 5.
The CH 10 to CH 12 can be set to equal the CH 9.
The CH 14 to CH 16 can be set to equal the CH 13.
Refer to Section 9.3.2, "Sharing Settings Between Channels".