Instruction manual

9-1

9 SDI SIGNAL SETTINGS (SDI SETTING)

The SDI SETTING is used to set the SDI output signal.

To display the SDI SETTING, press the MENU key repeatedly until SDI SETTING is

displayed. After the SDI SETTING is displayed, select the item to be set by using the [t] and

[u] keys.

Sets the format.

Refer to Section 9.1, “Setting Format”.

Sets the timing.

Refer to Section 9.2, “Setting Timing”.

Sets the embedded audio.

Refer to Section 9.3, “Setting Embedded Audio”.

Sets on/off of Y, Cb, and Cr respectively.

Refer to Section 9.4, “Setting ON/OFF of Y, Cb, and Cr.”.

Sets the marker.

Refer to Section 9.5, “Setting Safety Area Marker (to be supported in

the future)”.

Sets the ID Character.

Refer to Section 9.6, “Setting ID Character”.

Sets the Logo.

Refer to Section 9.7, “Setting Logomark”.

１．ＳＤＩＳＥＴＴＩＮＧ

u ＦＯＲＭＡＴＳＥＬＥＣＴ

１．ＳＤＩＳＥＴＴＩＮＧ

v ＴＩＭＩＮＧ

１．ＳＤＩＳＥＴＴＩＮＧ

v ＥＭＢＥＤＤＥＤＡＵＤＩＯ

１．ＳＤＩＳＥＴＴＩＮＧ

v Ｙ，Ｃｂ，ＣｒＯＮ／ＯＦＦ

１．ＳＤＩＳＥＴＴＩＮＧ

v ＳＡＦＥＴＹＡＲＥＡ

１．ＳＤＩＳＥＴＴＩＮＧ

v ＩＤＣＨＡＲＡＣＴＥＲ

１．ＳＤＩＳＥＴＴＩＮＧ

v ＬＯＧＯ

Sets the pattern scroll.

Refer to Section 9.8, “Setting Pattern Scroll”.

Sets the pattern changing automatically.

Refer to Section 9.9, “Setting of Automatic Pattern Changing”.

１．ＳＤＩＳＥＴＴＩＮＧ

v ＰＡＴＴＥＲＮＳＣＲＯＬＬ

１．ＳＤＩＳＥＴＴＩＮＧ

t ＰＡＴＴＥＲＮＣＨＡＮＧＥ