Instruction manual

8-2
8.2 Setting Timing
The TIMING is used to set the analog black signal timing with respect to the internal
reference signal.
Three internal reference frequencies are provided: 2.997 MHz, 6.250 MHz, and 3.000
MHz.
8.2.1 Timing in Frame Steps
The F-PHASE is used to set the timing in frame steps. This menu is only displayed in
NTSC and PAL formats. The settable range depends on the format.
● Settable Range
NTSC: ±5 frames, in 1 frame steps
PAL: ±2 frames, in 1 frame steps
● Setting Procedure of Timing in Frame Steps
Display the TIMING by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＢＬＫ ＳＥＴＴＩＮＧ
u ＢＬＡＣＫ１，２ ＳＩＧＮＡＬ
２．ＢＬＡＣＫ１，２ ＳＩＧＮＡＬ
t ＴＩＭＩＮＧ
３．ＴＩＭＩＮＧ
u Ｆ－ＰＨＡＳＥ
Select the signal to be set by using the [5] and [6] keys.
４．Ｆ－ＰＨＡＳＥ Ｒ：６．２５０Ｈｚ
ＢＬＫ１，２ ＋２ ＦＲＡＭＥ
Press the ENTER key. Press the MENU key to cancel.
Display the F-PHASE by using the [5] and [6] keys.
Sets the frame by using the [5] and [6] keys.
The internal reference signal is displayed at the upper-right
corner of the screen.
３．ＴＩＭＩＮＧ
u Ｆ－ＰＨＡＳＥ
Press the ENTER key.