Instruction manual

7-6
MANUAL (STAYinSYNC) This instrument locks to the signal being set according
to the GENLOCK FORMAT selected. The EXT mode is
automatically selected when the external reference
signal with the same format specified to the GENLOCK
input is applied after the power is turned on.
If the external reference signal is accidentally
intermitted during operation, the instrument continues
the operation immediately before the signal intermittent
since the STAYinSYNC mode is provided. The EXT
LED blinks in this case. The STAYinSYNC mode will be
held until the reset operation is performed via the front
panel controls and pressing the ENTER key even after
the external is recovered. If unlock status occurs when
this instrument locks to the specified external signal,
select this mode to lock the instrument after operation is
completed. When the external reference signal in
specified format is used to lock the instrument, select
this mode to immediately lock this instrument to the
external reference signal even when ignoring any
abnormal picture momentarily is displayed due to a
transient in lock operation.
● Selecting Procedure of GENLOCK Mode (except MANUAL)
Display the GENLOCK MODE by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key. Press the MENU key to cancel.
１．ＧＬ ＳＥＴＴＩＮＧ
v ＧＥＮＬＯＣＫ ＭＯＤＥ ＳＥＴ
２．ＧＥＮＬＯＣＫ ＭＯＤＥ ＳＥＴ
v ＡＵＴＯ （ＧＯ ＩＮＴＥＲＮＡＬ）
２．ＧＥＮＬＯＣＫ ＭＯＤＥ ＳＥＴ
v＊ＡＵＴＯ （ＧＯ ＩＮＴＥＲＮＡＬ）
Display the GENLOCK MODE SET by using the [5] and [6]
keys.
"*" is displayed before the selected genlock mode.