Instruction manual

7-4
7.1.4 Saving Log
The GENLOCK LOG SAVE is used to save up to ten log data saved in Section 7.1.2,
"Recording Log" on the memory card.
The logs are saved in the LOG folder named "LOG_0.TXT" to "LOG_9.TXT" in text file
format.
● Log Saving Procedure
*1 Screens may be displayed as shown in Figures below.
*2 In case the logo data is already saved, it is displayed as shown in Figure below.
５．ＷＡＲＮＩＮＧ！！ ＯＶＥＲ ＷＲ？
□ＯＫ ■ＣＡＮＣＥＬ
３．ＧＥＮＬＯＣＫ ＬＯＧ ＳＡＶＥ
uＬＯＧ Ｎｏ．
ＣＦ ＣＡＲＤ ＮＯＴ ＲＥＡＤＹ
ＰＵＳＨ ＭＥＮＵ ＫＥＹ
In case the log data is already saved.
In case the memory card is not connected.
Select the LOG number from 0 to 9 by using the
[
5
]
and
[
6
]
keys. (*1)
Press the ENTER key.
Press the ENTER key.
１．ＧＬ ＳＥＴＴＩＮＧ
u
ＧＥＮＬＯＣＫ
ＦＵＮＣＴＩＯＮ
２．ＧＥＮＬＯＣＫ ＦＵＮＣＴＩＯＮ
t
ＧＥＮＬＯＣＫ
ＬＯＧ ＳＡＶＥ
３．ＧＥＮＬＯＣＫ ＬＯＧ ＳＡＶＥ
u
ＬＯＧ
Ｎｏ．０
４．ＬＯＧ Ｎｏ． ０
■ＯＫ □ＣＡＮＣＥＬ
Press the ENTER ke
y
. Press the MENU ke
y
to cancel
Display the GENLOCK FUNCTION
by using the
[
5
]
and
[
6
]
keys.
Display the
GENLOCK LOG SAVE by using the
[
5
]
and
[
6
]
keys.
４．ＬＯＧ
ＣＯＭＰＬＥＴＥ
！
Press the ENTER ke
y
. Press the MENU ke
y
to cancel
Select OK by using the
[
3
]
and
[
4
]
keys.
When no saving operation is required, select CANCEL.
The log data is now saved. Press the MENU key to return to the
“2. GENLOCK FUNCTION”. (*2)
Ｎｏ．０