Instruction manual

7-3
7.1.3 Displaying Log
The GENLOCK LOG DISP is used to display the data logged in Section 7.1.2,
"Recording Log".
Up to 64 characters x 99 lines can be displayed. When the number of logs exceeds 99
lines, the oldest log will be deleted. Figure below shows an example.
The logs are numbered from 1 to 99. To select the log number, press the [t] key and [u]
keys.
The time stamp is displayed in passage day and time after the power is turned on.
When the calendar is set in Section 6.6, "Setting Calendar", the calendar is displayed
instead of the passage day and time.
● Log Displaying Procedure
The log number and the screen continued form the previous
screen are displayed. The first letter is the same as the last lette
r
on the previous screen.
To display the continued information, press the ｢4｣ key.
To display the continued information, press the ｢4｣ key.
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
５：００００ｄａｙｓ００：００：２７4
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
５：７ ＤＡＴＥ ＆ ＴＩＭＥ ＡＤ4
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
５：ＤＪＵＳＴ
The log number and time stamp are displayed. When the
continued information exists, ｢4｣ is displayed.
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
５：００００ｄａｙｓ００：００：２７4
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
４：００００ｄａｙｓ００：００：２３4
[u] key
[t] key
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
５： ２００７／０１／０１ １２：３4
Confirm the log status by using the [5], [6], [3], and [4]
keys.
Press the ENTER key.
Press the ENTER key.
１．ＧＬ ＳＥＴＴＩＮＧ
u ＧＥＮＬＯＣＫ ＦＵＮＣＴＩＯＮ
２．ＧＥＮＬＯＣＫ ＦＵＮＣＴＩＯＮ
v ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
３．ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
５：００００ｄａｙｓ００：００：２７4
２．ＧＥＮＬＯＣＫ ＦＵＮＣＴＩＯＮ
v ＧＥＮＬＯＣＫ ＬＯＧ ＤＩＳＰ
Press the ENTER key or MENU key to return.
Display the GENLOCK FUNCTION by using the [5] and [6]
keys.
Display the GENLOCK LOG DISP by using the [5] and [6]
keys.