Instruction manual

6-13
6.6 Setting Calendar
The DATE & TIME ADJUST is used to set the calendar. The calendar is retained while
the instrument is powered on. When the power is turned off, the calendar returns to the
initial settings (i.e., 2007/01/01 00:00:00).
When the calendar is set, the log time stamp displayed in Section 7.1.3, "Displaying Log"
is changed from the passage day and time to calendar.
● Calendar Setting Procedure
6.7 Displaying the Version
The VERSION DISPLAY is used to display the software version.
● Displaying Procedure of Software Version
Move the cursor by using the [3] and [4] keys to select the
desired digit, then set the value by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key. Press the MENU key to cancel.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＤＡＴＥ ＆ ＴＩＭＥ ＡＤＪＵＳＴ
２．ＤＡＴＥ ＆ ＴＩＭＥ ＡＤＪＵＳＴ
２００７
／０１／０１ １２：３８：２８
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＤＡＴＥ ＆ ＴＩＭＥ ＡＤＪＵＳＴ
Display the DATE & TIME ADJUST by using the [5] and [6]
keys.
Software version is displayed.
Press the ENTER key.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
t ＶＥＲＳＩＯＮ ＤＩＳＰＬＡＹ
２．ＶＥＲＳＩＯＮ ＤＩＳＰＬＡＹ
ＬＴ４４００ Ｖｅｒ １．００
Display the VERSION DISPLAY by using the [5] and [6]
keys.