Instruction manual

6-12
6.4.3 GATEWAY
The GATEWAY is used to set the gateway.
To enable the settings, turn the power off, then power on again.
● GATEWAY Setting Procedure
6.5 Passage Day and Time after Turning Power On
The "DAY & TIME after ON" is used to display the passage day and time after the
power is turned on.
● Displaying Passage Time
Select OK by using the [3] and [4] keys.
When canceling, select CANSEL.
Press the ENTER key.
Press the ENTER key. Press the MENU key to cancel.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＥＴＨＥＲＮＥＴ ＳＥＴ
２．ＥＴＨＥＲＮＥＴ ＳＥＴ
t ＧＡＴＥＷＡＹ
３．ＧＡＴＥＷＡＹ
ＧＷ： ０
． ０． ０． ０
ＧＷ： ０． ０． ０． ０
■ＯＫ □ＣＡＮＣＥＬ
Press the ENTER key.
２．ＥＴＨＥＲＮＥＴ ＳＥＴ
t ＧＡＴＥＷＡＹ
Press the ENTER key.
Display the ETHERNET SET by using the [5] and [6] keys.
Display the GATEWAY by using the [5] and [6] keys.
Move the cursor by using the [3] and [4] keys to select the
desired digit, then set the value by using the [5] and [6]
keys. The settable range is 0 to 255.
Passage day and time after turning the power on is displayed.
Press the ENTER key.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＤＡＹ＆ＴＩＭＥ ａｆｔｅｒ ＯＮ
２．ＤＡＹ＆ＴＩＭＥ ａｆｔｅｒ ＯＮ
００００１ｄａｙｓ １２：３８：２８
Display the DAY & TIME after ON by using the [5] and [6]
keys.