Instruction manual

6-11

6.4.2 SUBNET MASK

The SUBNET MASK is used to set the subnet mask.

To enable the settings, turn the power off, then power on again.

● Setting Procedure of SUBNET MASK

Select OK by using the [3] and [4] keys.

When canceling, select CANSEL.

Press the ENTER key.

Press the ENTER key. Press the MENU key to cancel.

１．ＵＴＩＬＩＴＹＭＥＮＵ

v ＥＴＨＥＲＮＥＴＳＥＴ

２．ＥＴＨＥＲＮＥＴＳＥＴ

v ＳＵＢＮＥＴＭＡＳＫ

３．ＳＵＢＮＥＴＭＡＳＫ

ＳＭ：２５５

．２５５．２５５．０

ＳＭ：２５５．２５５．２５５．０

■ＯＫ □ＣＡＮＣＥＬ

Press the ENTER key.

２．ＥＴＨＥＲＮＥＴＳＥＴ

v ＳＵＢＮＥＴＭＡＳＫ

Press the ENTER key.

Display the ETHERNET SET by using the [5] and [6] keys.

Display the SUBNET MASK by using the [5] and [6] keys.

Move the cursor by using the [3] and [4] keys to select the

desired digit, then set the value by using the [5] and [6]

keys. The settable range is 0 to 255.