Instruction manual

6-7
6.3.3 Storing Preset Data
The PRESET is used to store the preset data.
Up to ten preset data can respectively be stored in the internal memory and memory
card.
● Storing Procedure of Preset Data
*1 Screens may be displayed as shown in Figures below.
*2 In case the preset data is already stored, it is displayed as shown in Figure below.
５．ＷＡＲＮＩＮＧ！！ ＯＶＥＲ ＷＲ？
□ＯＫ ■ＣＡＮＣＥＬ
Select the preset number (i.e., 0 to 9) to be stored by using the
[5] and [6] keys. (*1)
Press the ENTER key.
Press the ENTER key. Press the MENU key to cancel.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＰＲＥＳＥＴ／ＲＥＣＡＬＬ
２．ＰＲＥＳＥＴ／ＲＥＣＡＬＬ
v ＰＲＥＳＥＴ
３．ＰＲＥＳＥＴ （ＩＮＴ＿ＭＥＭ）
uＰＲＥＳＥＴ Ｎｏ．０
４．ＰＲＥＳＥＴ Ｎｏ．０
■ＯＫ □ＣＡＮＣＥＬ
Press the ENTER key.
Display the PRESET by using the [5] and [6] keys.
Display the PRESET/RECALL by using the [5] and [6] keys.
Select OK by using the [3] and [4] keys.
When no store operation is required, select CANCEL.
Press the ENTER key. Press the MENU key to cancel.
４．ＰＲＥＳＥＴ Ｎｏ．０
ＣＯＭＰＬＥＴＥ ！
The preset data is now stored. Press the MENU key to return to
the "2.PRESET/RECALL”. (*2)
３．ＰＲＥＳＥＴ （ＥＸＴ＿ＣＡＲＤ）
uＰＲＥＳＥＴ Ｎｏ．０
３．ＰＲＥＳＥＴ （ＩＮＴ＿ＭＥＭ）
uＰＲＥＳＥＴ Ｎｏ．０
ＣＦ ＣＡＲＤ ＮＯＴ ＲＥＡＤＹ
ＰＵＳＨ ＭＥＮＵ ＫＥＹ
In case of the EXT_CARD is selected in Section 6.3.1,
"Selecting Media".
In case the preset data is already stored.
In case the memory card is not installed even when the
EXT_CARD is selected in Section 6.3.1, "Selecting Media".