Instruction manual

6-6
6.3.2 Recalling Preset Data
The RECALL is used to recall the preset data stored in Section 6.3.3, "Storing Preset
Data".
● Recalling Procedure of Preset Data
* Screens may be displayed as shown in Figures below.
Select the preset number (i.e., 0 to 9) to be recalled by using
the [5] and [6] keys. (*1)
Press the ENTER key.
Press the ENTER key. Press the MENU key to cancel.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＰＲＥＳＥＴ／ＲＥＣＡＬＬ
２．ＰＲＥＳＥＴ／ＲＥＣＡＬＬ
v ＲＥＣＡＬＬ
３．ＲＥＣＡＬＬ （ＩＮＴ＿ＭＥＭ）
uＲＥＣＡＬＬ Ｎｏ．０
４．ＲＥＣＡＬＬ Ｎｏ．０
■ＯＫ □ＣＡＮＣＥＬ
Press the ENTER key.
Display the RECALL by using the [5] and [6] keys.
Display the PRESET/RECALL by using the [5] and [6] keys.
４．ＲＥＣＡＬＬ Ｎｏ．０
ＣＯＭＰＬＥＴＥ ！
Select OK by using the [3] and [4] keys.
When no recalling operation is required, select CANCEL.
Press the ENTER key. Press the MENU key to cancel.
The preset data is now recalled. Press the MENU key to
return to the PRESET/RECALL menu.
３．ＲＥＣＡＬＬ （ＥＸＴ＿ＣＡＲＤ）
uＲＥＣＡＬＬ Ｎｏ．０
３．ＲＥＣＡＬＬ （ＩＮＴ＿ＭＥＭ）
uＲＥＣＡＬＬ Ｎｏ．０ ＮＯ ＤＡＴＡ
ＣＦ ＣＡＲＤ ＮＯＴ ＲＥＡＤＹ
ＰＵＳＨ ＭＥＮＵ ＫＥＹ
In case of the EXT_CARD is selected in Section 6.3.1,
"Selecting Media".
In case of the preset data does not exist.
In case of the memory card is not installed even when the
EXT_CARD is selected in Section 6.3.1, "Selecting Media".