Instruction manual

6-1

6 MAINFRAME SETTING (UTILITY MENU)

The UTILITY MENU is used to set the main frame setting conditions.

To display the UTILITY MENU, press the MENU key repeatedly until UTILITY MENU is

displayed. After the UTILITY MENU is displayed, select the item to be displayed by using the

[t] and [u] keys.

This screen is used to set the LCD backlight.

Refer to Section 6.1, “Setting the Backlight”.

This screen is used to store or recall the preset data.

Refer to Section 6.3, “Setting the Preset Data”.

This screen is used to set the Ethernet.

Refer to Section 6.4, “Ethernet Parameters Setup”.

This screen is used to display the passage day and time afte

the power is turned on.

Refer to Section 6.5, “Passage Day and Time after Turning

Power ON”.

This screen is used to set the calendar.

Refer to Section 6.6, “Setting calendar”.

This screen is used to display the software version.

Refer to Section 6.7, “Displaying the Version”.

１．ＵＴＩＬＩＴＹＭＥＮＵ

u ＬＣＤＢＡＣＫＬＩＧＨＴ

１．ＵＴＩＬＩＴＹＭＥＮＵ

v ＫＥＹＬＯＣＫＳＥＴ

１．ＵＴＩＬＩＴＹＭＥＮＵ

v ＰＲＥＳＥＴ／ＲＥＣＡＬＬ

１．ＵＴＩＬＩＴＹＭＥＮＵ

v ＥＴＨＥＲＮＥＴＳＥＴ

１．ＵＴＩＬＩＴＹＭＥＮＵ

v ＤＡＹ＆ＴＩＭＥａｆｔｅｒＯＮ

１．ＵＴＩＬＩＴＹＭＥＮＵ

v ＤＡＴＥ＆ＴＩＭＥＡＤＪＵＳＴ

１．ＵＴＩＬＩＴＹＭＥＮＵ

t ＶＥＲＳＩＯＮＤＩＳＰＬＡＹ

This screen is used to set the front panel key lock mode.

Refer to Section 6.2, “Setting the KEY LOCK Mode”.