Instruction manual

5-2
5.3.2 Displaying Vertical Timing
The TIMING-V-PHASE screen displays the vertical timing of SDI signal.
Refer to Section 9.2.1, “Vertical Timing”
5.3.3 Displaying Horizontal Timing
The TIMING-H-PHASE screen displays the horizontal timing of SDI signal in dots.
Refer to Section 9.2.2, “Horizontal Timing (dot)”.
5.3.4 Displaying Embedded Audio Signal ON/OFF
The EMB. AUDIO screen displays the embedded signal on/off status of each group.
Refer
to Section 9.3.3, “Audio Signal ON/OFF (in each group)”
5.3.5 Displaying ON/OFF of Y, C
b, and Cr
The SDI OUTPUT screen displays the on/off status of Y, Cb, and Cr respectively.
Refer to Section 9.4, “Setting ON/OFF of Y, Cb, Cr”
5.3.6 Displaying Action Safety Area ON/OFF
The SAFETY AREA-90% AREA screen displays the action safety area on/off status.
Refer to Section 9.5.1, “Action Safety Area”.
［ＳＴＡＴＵＳ］ ＴＩＭＩＮＧ
v Ｖ－ＰＨＡＳＥ ５ ＬＩＮＥ
［ＳＴＡＴＵＳ］ ＴＩＭＩＮＧ
v Ｈ－ＰＨＡＳＥ ５ ＤＯＴ
［ＳＴＡＴＵＳ］ ＥＭＢ．ＡＵＤＩＯ
v ■Ｇ１ ■Ｇ２ ■Ｇ３ ■Ｇ４
［ＳＴＡＴＵＳ］ ＳＤＩ ＯＵＴＰＵＴ
v ■Ｙ ■Ｃｂ ■Ｃｒ
［ＳＴＡＴＵＳ］ ＳＡＦＥＴＹ ＡＲＥＡ
v ９０％ ＡＲＥＡ ：ＯＦＦ