Instruction manual

5-1
5 STATUS DISPLAY (STATUS)
The STATUS is used to display the current major setting status. This screen is only used for
confirmation; not used for setting the operating conditions.
To display the STATUS, press the MENU key repeatedly until STATUS is displayed.
After the STATUS is displayed, select the item to be displayed by using the [t] and [u] keys.
5.1 Genlock Signal
5.1.1 Displaying Status
In "GENLOCK ST", the state of Genlock is displayed.
5.2 Analog Black Signal
5.2.1 Displaying Format
The "BLACK 1, 2", "BLACK 3, 4", and "BLACK 5, 6" screens display the analog black
signal format.
Refer to Section 8.1, "Setting Format".
5.3 SDI Signal
5.3.1 Displaying Format
The FORMAT screen displays the SDI signal format.
Refer to Section 9.1, "Setting Format".
［ＳＴＡＴＵＳ］ ＧＥＮＬＯＣＫ ＳＴ
ＩＮＴ
［ＳＴＡＴＵＳ］ ＢＬＡＣＫ １，２
v １０８０ｉ／５９．９４
［ＳＴＡＴＵＳ］ ＢＬＡＣＫ ３，４
v １０８０ｉ／５９．９４
［ＳＴＡＴＵＳ］ ＢＬＡＣＫ ５，６
v １０８０ｉ／５９．９４
［ＳＴＡＴＵＳ］ ＦＯＲＭＡＴ
v １０８０ｉ／５９．９４