Instruction manual

4-5
4.5 Selecting Pattern Key
Press the Pattern selection key to select the pattern. (see Figure 4-1)
Figure 4-1 Pattern selection key
Table 4-2 lists the selectable patterns. In case of the multiple patterns are assigned to
the single key, these patterns are sequentially selected by pressing the key.
Table 4-2 Pattern list
SDI FORMAT COLOR BAR 1 COLOR BAR 2 CHECK
FIELD
HD COLOR BAR 100%
COLOR BAR 75%
MULTI COLOR BAR 100%
MULTI COLOR BAR 75%
MULTI COLOR BAR (+I)
CHECK
FIELD
SD（525i/59.94）
COLOR BAR 100%
COLOR BAR 75%
SMPTE COLOR BAR CHECK
FIELD
SD（625i/50）
COLOR BAR 100% EBU COLOR BAR
BBC COLOR BAR
CHECK
FIELD
For example, when the SDI FORMAT is set to HD, pressing the COLOR BAR 1 key
sequentially selects the patterns as shown in Figure below.
4.6 KEY LOCK Switch
Setting the KEY LOCK switch ON only locks the FORMAT key (*1).
Use an insulated flat-head screwdriver to set the KEY LOCK switch ON.
While the KEY LOCK switch is set ON, pressing the FORMAT key displays the following
screen.
All front panel keys will be locked when the KEY LOCK SET in the UTILITY MENU is set
ON.
Refer to Section 6.2, "Setting the KEY LOCK Mode".
*1 The format can be selected from the SDI SETTING or BLK SETTING menu.
ＰＡＴＴＥＲＮ ＣＨＡＮＧＥ
ＣＯＬＯＲ ＢＡＲ １００％
ＰＡＴＴＥＲＮ ＣＨＡＮＧＥ
ＣＯＬＯＲ ＢＡＲ ７５％
ＫＥＹ ＬＯＣＫ ＯＮ
ＴＵＲＮ ＯＦＦ ＫＥＹ＿ＬＯＣＫ ＳＷ