Instruction manual

4-2
Each explanation is as follows.
1 STATUS
The STATUS is used to display the current setting status. This screen is only used for
confirming the current status; not used for setting the operating conditions.
Refer to Chapter 5, “STATUS DISPLAY (STATUS)”
2 UTILITY MENU
The UTILITY MENU is used to set the main frame setting conditions (e.g., backlight,
calendar).
Refer to Chapter 6, “MAINFRAME SETTING (UTILITY MENU)”.
3 GL SETTING
The GL SETTING is used to set the genlock signals.
Refer to Chapter 7, “GENLOCK SIGNAL SETTINGS (GL SETTING)”.
4 BLK SETTING
The BLK SETTING is used to set the analog black signals.
Refer to Chapter 8, “ANALOG BLACK SIGNAL SETTINGS (BLK SETTING)”.
5 SDI SETTING
The SDI SETTING is used to set the SDI signals
Refer to Chapter 9, “SDI SIGNAL SETTINGS (SDI SETTING)”.
6 WCLK SETTING
The WCLK SETTING is used to set the word clock.
Refer to Chapter 10, “WORD CLOCK SETTINGS (WCLK SETTING)”.
4.3 Menu Keys
1 ［t］ key and ［u］ key
These keys are used to change the setting items or numeric values in the menu
selected.
The [t] key is only enabled when the ｢t｣ or ｢v｣ is displayed at the lower-left
corner of the screen.
The [u] key is only enabled when the ｢u｣ or ｢v｣ is displayed at the lower-left
corner of the screen.
2 ［3］key, ［4］key
It uses for selecting or moving the items.
１．ＵＴＩＬＩＴＹ ＭＥＮＵ
v ＫＥＹ ＬＯＣＫ ＳＥＴ
２．ＤＡＴＥ ＆ ＴＩＭＥ ＡＤＪＵＳＴ
２００７
／０１／０１ １２：３８：２８
２．ＬＣＤ ＢＡＣＫ ＬＩＧＨＴ
■ＨＩＧＨ □ＭＩＤ □ＬＯＷ □ＯＦＦ
２．ＤＡＴＥ ＆ ＴＩＭＥ ＡＤＪＵＳＴ
２００７
／０１／０１ １２：３８：２８