Instruction manual

2-6

Output Timing

Setting: Three systems can be set individually.

Variable Range

NTSC black burst

signal: ± 5 frames

PAL black burst

signal: ± 2 frames

HDTV tri-level sync: 1 frame (entire frame range)

Setting Resolution

NTSC/PAL black

burst signal: 0.0185 μs steps (54 MHz clock steps)

HDTV tri-level sync: 0.0135 μs steps (74.25/1.001MHz in clock steps or

74.25MHz in clock steps)

2.3.4 Word Clock Output

Frequency: 48kHz

Output Impedance: 75Ω unbalanced (for 1 Vp-p output setting)

Output Amplitude: 1Vp-p±0.1V (into 75 Ω) or 5V CMOS, selectable

Output Connector: BNC

Number of Outputs: 1

Timing Variable

Variable Range: ±1 AES/EBU frame

Setting Resolution: 512 fs (24.576 MHz) steps

2.3.5 Memory Card Slot

Function: Storing/ reading preset data

Reading logo data

2.3.6 Ethernet Connector

Type: 10BASE-T/100BASE-TX, auto switching

Function: Transferring operation status (e.g., genlock status)

Remote control (e.g., pattern switching)

SNMP supported (All the functions described above are

supported in the future)

2.3.7 LCD Panel

Number of Characters: 20 characters x 2 lines can be displayed (w/backlight).

2.3.8 General Specifications

Environmental Conditions

Operating Temperature: 0 to 40℃

Operating Humidity: ≤ 85% RH (without condensation)

Spec-Guaranteed Temperature: 10 to 35℃

Spec-Guaranteed Humidity: ≤ 85% RH (without condensation)

Operating Environment: Indoor use

Operating Altitude: Up to 2,000m

Overvoltage Category: Ⅰ

Pollution Degree: 2