Instruction manual

9-36
● Setting Procedure of Pattern Scroll
9.9 Setting of Automatic Pattern Changing
The PATTERN CHANGE is used to set the automatic pattern change mode. When ON is
selected in Section 9.9.2, "Automatic Pattern Changing ON/OFF", patterns listed in Table
4-2 is automatically changed from the left.
9.9.1 Setting of Changing Time
The SPEED is used to set the pattern change speed in seconds.
● Settable Range
1 to 255 seconds, in 1 second steps. The initial setting is 1 second.
● Setting Procedure of Changing Time
Display the SCROLL ON/OFF by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＰＡＴＴＥＲＮ ＳＣＲＯＬＬ
２．ＰＡＴＴＥＲＮ ＳＣＲＯＬＬ
t ＳＣＲＯＬＬ ＯＮ／ＯＦＦ
３．ＳＣＲＯＬＬ ＯＮ／ＯＦＦ
■ＯＮ □ＯＦＦ
Display the PATTERN SCROLL by using the [5] and [6]
keys.
２．ＰＡＴＴＥＲＮ ＳＣＲＯＬＬ
t ＳＣＲＯＬＬ ＯＮ／ＯＦＦ
Press the ENTER key. Press the MENU key to cancel.
Select the ON by using the [3] and [4] keys.
Select the OFF to disable the pattern scroll mode.
Display the SPEED by using the [5] and [6] keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
t ＰＡＴＴＥＲＮ ＣＨＡＮＧＥ
２．ＰＡＴＴＥＲＮ ＣＨＡＮＧＥ
u ＳＰＥＥＤ
３．ＳＰＥＥＤ
１ ｓｅｃ
Display the PATTERN CHANGE by using the [5] and [6]
keys.
２．ＰＡＴＴＥＲＮ ＣＨＡＮＧＥ
u ＳＰＥＥＤ
Press the ENTER key. Press the MENU key to cancel.
Set the time by using the [5] and [6] keys.