Instruction manual

9-33
9.7.8 Saving Logomark
The "LOGO SAVE (CF 4 INT)" is used to save the logomark transferred from the
memory card to the main frame.
The saved logomark is retained even when the power is turned off.
● Savable Contents
Number of Savable Items: 1 Overwritten with new data
Capacity: 512 k bytes, max (Version 1.30 and later)
Size: 1920 dots x 1080 lines (Version 1.30 and later)(*1)
※1 Displayable size is up to 320 dots x 240 lines (QVGA). However, up to 1920 dots
x 1080 lines can be displayed when Option (LT4400-70) is installed.
● Logomark Saving Procedure
*2 In case the logomark is already saved, it is displayed as shown in Figure below.
４．ＷＡＲＮＩＮＧ！！ ＯＶＥＲ ＷＲ？
□ＯＫ ■ＣＡＮＣＥＬ
Display the LOGO SAVE (CF4INT) by using the [5] and [6]
keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v ＬＯＧＯ
２．ＬＯＧＯ
t ＬＯＧＯ ＳＡＶＥ （ＣＦ4ＩＮＴ）
３．ＬＯＧＯ ＳＡＶＥ （ＣＦ4ＩＮＴ）
v ＬＯＧＯ．ＬＧ ２／ ３
Display the LOGO by using the [5] and [6] keys.
Press the ENTER key. Press the MENU key to cancel.
Select the file to be save by using the [5] and [6] keys.
３．ＬＯＧＯ ＳＡＶＥ （ＣＦ4ＩＮＴ）
■■■■■ ＣＯＭＰＬＥＴＥ ！
The logomark has been saved now. Press the MENU key to
return to the “2.LOGO”. (*2)