Instruction manual

9-32
9.7.7 Automatic Transferring Logomark
The SET TO CF CARD is used to set the automatic logomark transfer mode when power
is turned on. The logomark selected in Section 9.7.5, "Selecting Logomark" is
automatically transferred. The setting condition is saved on the memory card named
"set_logo.txt". (See Figure 9-1.) If "set_logo.txt" already exists on the memory card, it will
be overwritten.
● Automatic Transferring Procedure of Logomark
*1 In case the transfer setting is already saved, it is displayed as shown in Figure below.
５．ＷＡＲＮＩＮＧ！！ ＯＶＥＲ ＷＲ？
□ＯＫ ■ＣＡＮＣＥＬ
Display the SET TO CF CARD by using the
[
5
]
and
[
6
]
keys.
Press the ENTER key.
Press the ENTER key.
１．ＳＤＩ ＳＥＴＴＩＮＧ
v
ＬＯＧＯ
２．ＬＯＧＯ
v
ＬＯＧＯ
ＳＥＴ
３．ＬＯＧＯ ＳＥＴ
t
ＳＥＴ ＴＯ ＣＦ ＣＡＲＤ
４．ＳＥＴ ＴＯ ＣＦ ＣＡＲＤ
■ＯＫ
□ＣＡＮＣＥＬ
Press the ENTER key.
Display the LOGO by using the
[
5
]
and
[
6
]
keys.
Display the LOGO SET by using the
[
5
]
and
[
6
]
keys.
４．ＳＥＴ ＴＯ ＣＦ ＣＡＲＤ
■■■■■■ ＣＯＭＰＬＥＴＥ ！
Press the ENTER ke
y
. Press the MENU ke
y
to cancel
Select the OK by using the
[
3
]
and
[
4
]
keys.
Select the CANCEL not to set.
The automatic transferring has been set now.
Press the MENU key to return to the “3. LOGO SET”. ( *1)