Instruction manual

IV
GENERAL SAFETY SUMMARY
■ Caution on Input/Output Terminals
Input terminals are rated with a maximum input. Do not supply an input over the specified
rating in the standard section of the instruction manual. Also, do not supply external power to
Output terminal, this could cause the instrument to malfunction.
■ Caution on AC Adaptor
The instrument that uses the AC adaptor should use the thing surely specified.
If things other than specification are used, there is danger of the instrument malfunction and a
fire.
■ Caution When Not Using the Instrument For a Long Time
Make sure to disconnect the power cord from the socket when you do not use the instrument
for a long time.
■ Caution on Connection of the Instrument and a Display
While the instrument is being connected with a ground terminal of the display, connect or
disconnect the signal cable .
By connecting the ground of the display with the instrument, the output part of the instrument
becomes difficult to break easily.
Be careful especially, when you connect the display under development.
Connect the ground by the following method.
・The ground terminal of the instrument connects with the ground of the display.
CAUTION