User manual

30
Use
1. Button
(Easy iron. If you use this button it will be easier to
iron the fabrics later).
Pressing this button the water will hold up in the
wash tub at the end of the cycle. Press again to drain
the water and take out the clothes.
2. button
Press it to reduce the spinning speed from 1000 to
600 r.p.m. (programs for cotton and linen)
Press it to reduce the spinning speed from 740 to
400 r.p.m. (programs for synthetics, mixed and
wool).
3 button
Pressing this button before starting the intense
program there will be one rinse less which leads to
energy and water saving.
4 On/off lamp
It lights when the appliance is operating.
5 Temperature selector
This control allows you to select the temperature of
the washing cycle in accordance with the kind of
clothes to be washed.
Turn the control until the required temperature
coincides with the marker.
On the program table you will find the most apropriate
temperature for each kind of washing. Selecting
any program can be run through with cold water. This
will ensure a saving in electricity consumption.
6. Program selector
To select the required programme turn the control
clockwise to the required program. If at any chance
you pass by the required programme NEVER TURN
THE CONTROL ANTICLOCKWISE just continue
clockwise until the required programme is reached
again.
Control panel
1 2 3 4 5 6