User manual

9
Reversibilidad de las puertas
Antes de efectuar cualquier operación, desenchufe
el aparato.
Para cambiar el sentido de aperture de la puerta,
proceda de la siguiente manera:
1. quite la bisagra superior, teniendo cuidado de
que la puerta no se caiga.
2. quite la puerta congelador deslizándola hacia
arriba
3. quite el tapón superior de la puerta congelador y
colóquelo en el lado opuesto
4. quite la cubierta superior de la esquina y
colóquela en el lado opuesto
5. desatornille la bisagra central (H)
6. preste atención de quitar también un pequeño
distanciador que encontrara bajo la bisagra
central (H)
7. quite la puerta frigorífico deslizándola hacia
arriba
8. quite el tapón superior de la puerta frigorifico y
colóquelo en el lado opuesto
9. quite los tapones (u) que están situados en la
parte inferior del aparato
10.Desatornille la bisagra inferior (e) eliminando los
tornillos y vuélvala a colocar en el lado opuesto.
11. desenrosque el pivote (f) de la bisagra inferior y
quite la arandela (h) cambie ambos al otro
agujero de la misma bisagra inferior
12.coloque los tapones (u) en el lado opuesto
13.coloque la puerta frigorífico sobre el pivote (f) de
la bisagra inferior (e)
14.inserte el pivote de la bisagra central en el
agujero de la puerta frigorífico y fije la bisagra sin
olvidad el pequeño distanciador.
15.inserte la puerta congelador sobre el pivote de la
bisagra central
16.coloque la bisagra superior en el lado puesto y
sobre el agujero de la puerta congelador
17.en cualquier caso, si no quiere realizar el
proceso arriba mencionado, puede contactar con
el servicio de asistencia mas cercano. Un
especialista de nuestro servicio técnico llevara a
cabo dicha reversibilidad a su costo.
Atención
Terminada la operación de reversibilidad de la
puerta, controle que la guarnición magnética esta
bien adherida al mueble. Si la temperatura ambiente
es fria (por ejemplo en invierno), puede suceder que
la guarnición no adhiera perfectamente. En este
caso cabe esperar que se recobre de forma natural
o si desea acelerar dicho proceso, puede calentarla
con un secador normal de pelo (desenchufe el
aparato).
H
I
I
I
12
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation. Small pieces may even be cooked
still frozen, directly from the freezer: in this case,
cooking will take longer.
Ice-cube production
This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.
Do not use metallic instruments to remove the
trays from the freezer.
Storage of frozen food
When first starting-up or after a period out of use,
before putting the products in the compartment let
the appliance run for at least two hours on the
coldest setting, then turn the thermostat knob to the
normal operating position.
Freezing fresh food
The freezer compartment is suitable for long term
storage of commercially frozen food, and for freezing
fresh food.
To freeze fresh foods it is not necessary to change
the setting of the thermostat knob.
However, for a quicker freezing operation, turn the
thermostat knob to the coldest setting; but remember
that, in this condition, the refrigerator compartment
temeprature might drop below 0°C. If this occurs
reset thermostat knob to a warmer setting.
Fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids in
the refrigerator;
• do cover or wrap the food, particularly if it has a
strong flavour.
• Position food so that air can circulate freely round it.
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
lower settings or reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
• room temperature;
• how often the door is opened;
• the quantity of food stored;
• location of appliance.
A medium setting is generally the most suitable.
Important
If the ambient temperature is high or the
appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run
continuously causing frost to form on the rear
wall. In this case the dial must be set to a higher
temperature to allow automatic defrosting and
therefore reduced energy consumption.
Important
In the event of accidental defrosting, for example
due to a power failure, if the power has been off
for longer that the value shown in the technical
characteristics chart under “rising time”, the
defrosted food must be consumed quickly or
cooked immediately and then refrozen (after
cooling).
Shelf holders
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
Move the shelf holders in the direction of the arrow,
raise the shelf from the rear and push it forward until
it is freed and remove the retainers.
A
B