Instructions for use

Factory Team Selected
9
Terminal Voltage Control (TVC)
The charger allows user to change the end voltage.
LiPo Battery Meter
The user can check battery’s total voltage, the highest voltage, the lowest voltage and each cell’s voltage.
Delta-peak Sensitivity for NiMH/NiCd
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the princi-
ple of the Delta-peak voltage detection. When the battery’s voltage exceeds the threshold, the process will be
terminated automatically.
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful
for the NiMH battery of low impedance and capacity in the ‘AUTO’ charging mode.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capaci-
ty exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature Threshold*
The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature
limit is reached, the process will be terminated.
*This function is available by connecting optional temperature probe, which is not included in the package.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect.
FeaturesFeatures