Instructions for use

Factory Team Selected

Battery Memory Set Program

For your convenience, the TC ECLIPS charger have a

data storage and load program, it can store 10 dif-

ferent battery data represent the respective speciﬁ-

cations of batteries, you can call back the data when

charging/discharging without setting up the program

again, press START/ ENTER button to make it blink

and use INC. or DEC. to set up the parameter.

The example is Lipo

battery pack

(2S/7.4V).

Set the terminal

voltage, it can be

adjusted

Set the cut-off

temperature, it can be

adjusted

Press the START/EN-

TER button more than

3 seconds to save the

program

This screen indicate

the saved proﬁle

This program is to load

the data stored at the

“save data” program.

Press the START/

ENTER button more

than 3 seconds to load

a memory, otherwise,

you only enter to the

setting mode

Set the voltage and

number of cells,

along with the normal

voltage

Set the charge current,

it can be adjusted

Set the discharge

current, it can be

adjusted

Set the discharge

voltage, it can be

adjusted