Instructions for use

20
Ni-MH • Ni-CD Battery Program
Lithium Battery Meter Program
Charging NiMH • NiCD Battery in CYCLE Mode
You can set up sequence on the left and the number of cycles
on the right. Range of the cycle number is 1-5.
Press BATT TYPE/STOP button to stop program, you can press
Inc. or Dec. button to alter charge current, the sound indicates
the end of program.
Press the START/ENTER button to enter the Lithium Battery
Meter program.
The screen indicate each cell’s voltage
The screen indicate the total voltage, the highest voltage, and
the lowest voltage
The user can check battery’s total voltage, the highest voltage, the lowest voltage and each cell’s voltage.
Please connect the battery to the charger with main battery lead and balance wires to balance socket.