Instructions for use

18
Ni-MH • Ni-CD Battery Program
This program is for charging and discharging of NiMH/NiCD
batteries associated with R/C models applications. You can press
Inc. or Dec. button to change the parameter value, press START/
ENTER button to store the value.
The screen displays the real-time charging status. Press BATT
TYPE/STOP button to stop the process. The audible sound
indicate the end of process.
The program is for charging of NiMH/NiCD batteries in auto
mode. You can make it blink in the current field and press INC.
or DEC. to switch mode.
The screen displays real-time charging status. Press BATT TYPE/
STOP button to stop the process.
The audible sound indicates the end of process.
Charging NiMH • NiCD Battery in CHARGE Mode
Charging NiMH • NiCD Battery in AUTO CHARGE Mode
In this program the charger detects the condition of the battery which is connected to the output and auto-
matically charges the battery. In this mode, you should set up the upper limit of the charge current to avoid
damage by excessive feeding current. Some batteries of low resistance and capacity can lead to higher current
in the auto charging mode.