Instructions for use

Factory Team Selected

Charging PB Battery in CHARGE Mode

Discharging PB Battery in DISCHARGE Mode

PB Battery Program

Set up the charge current on the left and nominal voltage on the

right. Range of current 0.1-12.0A, the voltage should match the

battery being charged. Press START/ENTER button for more than

3 seconds to start charging.

The screen display the real-time charging status.

Press START/ENTER button again to store the parameter value

you set. Press BATT TYPE/STOP button to end the program.

Set up the discharge current on the left and nominal voltage on

the right. Range of discharge current is 0.1-5.0A, the voltage

should match the battery being discharged.

Press ENTER/START button for more than 3 seconds to start dis-

charging.

The screen display the real-time discharging status. Press

START/ENTER button to change the discharging value.

Press START/ ENTER button again to store the parameter value

you set. Press BATT TYPE/STOP button to end the program.