Instructions for use

Discharging Lithium Battery in DISCHARGE Mode

Lithium Battery Program for Li-Po • Li-Po HV • Li-Fe • Li-Ion

The value of discharge current on the left can not exceed 1C, and

the value on the right can not be under the voltage recommended

by the manufacturer to avoid over discharging. press the START/

ENTER button for more than 3 seconds to start discharging.

This screen displays the number of cells you set up and the

processor detects.

R=Number of cells detected by charger.

S=Number of cells set by you at the previous screen.

If both numbers are identical you can start charging process.

If not, press BATT TYPE/ STOP button to go back to previous

screen to recheck the number of cells of the battery pack before

going ahead.

This screen shows the real-time status during charge process.

Press BATT TYPE/STOP button once to stop the charge process.