Instructions for use

Factory Team Selected
15
This screen displays the number of cells you set up and the
processor detects.
R=Number of cells detected by charger.
S=Number of cells set by you at the previous screen.
If both numbers are identical you can start charging process.
If not, press BATT TYPE/ STOP button to go back to previous
screen to recheck the number of cells of the battery pack before
going ahead.
This screen shows the real-time status during
charge process.
Press BATT TYPE/STOP button once to stop
the charge process.
This screen shows the real-time status during charge process.
Press BATT TYPE/STOP button once to stop the charge process.
Charging Lithium Battery in FAST CHARGE Mode
Charging Lithium Battery in STORAGE Mode
This function is for charging/discharging batteries which are not used at once. This program is designed for
charging or discharging of batteries of specific original state. They are classified by types: 3.75V Lilon,
3.85V LiPo, 3.95V LiPo HV and 3.3V LiFe. The program will begin to discharge if the original state of battery
exceeds the voltage level of storage.
At this screen, you can set up the current and voltage of the
battery pack. Charging and discharging will make the batteries
come to the voltage level of storage state.
Lithium Battery Program for Li-Po • Li-Po HV • Li-Fe • Li-Ion