Download the latest version of the manual and other languages from www.corally.com Revised : 2021-04-01 www.corally.
INTRODUCTION Thank you for purchasing a Team Corally car. This manual describes the instructions for using the model and the electronic components. You will also find some tips on how to maintain your RC model so that you can enjoy it for years to come. You have purchased one of the most efficient models available on the market that has been designed by a team of professionals. You will also benefit from the best after-sales support.
USE PRECAUTIONS Failure to operate your model in a safe and responsible manner may result in injury to yourself, others or damage to property around you. • Do not use your model on public roads or in areas where you may encounter pedestrians or riders. • Do not operate in a congested area or in crowds. • Do not operate in areas where loud noises can disturb others, such as hospitals and residential areas. • Do not operate your model with obstructed line of sight, at night or near water.
WARRANTY If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally / JSP Group Intl bvba, and purchased by a consumer, we Team Corally / JSP Group Intl bvba acknowledge the obligation to correct those faults or defects within the limitations described below. This manufacturers warranty is in addition to, and does not affect, the legal or contractual rights of the consumer which arise from the purchase of such products.
LIPO BATTERY SAFETY PRECAUTIONS • Follow and respect the manufacturer’s instructions for use • It is important to check that your ESC is set to LIPO if you are using a LIPO battery. Failure to comply with this instruction will result in increased battery discharge and may cause fire and damage to persons and property. • When charging or storing LiPo batteries always use LiPo Safety Bag (Flame retardant). • Always respect the maximum rate and voltage specified by the battery manufacturer.
CAR COMPONENTS Front Suspension Arm C-Hub Wheel Hex Adapter Steering Knuckle Steering Link Steering Servo Speed Controller (ESC) Battery compartment Receiver Box Power Switch Rear Shock Absorber Wheel Hub Rear Upright Rear Suspension Arm Brushless Motor 6 Spur Gear & Slipper
QUICK START GUIDE READ THE INSTRUCTIONS CHARGE THE BATTERY INSTALL 4x AA BATTERY 1.5V - AA BATTERY 1.5V - AA BATTERY 1.5V - AA BATTERY 1.5V - AA BATTERY CHARGER BATTERY MAKE SURE THAT ALL SCREWS AND NUTS ARE TIGHTENED PROPERLY. INSTALL THE BATTERY TURN ON THE TRANSMITTER (Always First) ON BAT TER Y CONNECT THE BATTERY TO THE ESC SWITCH ON THE ESC CHECK THE FUNCTIONS CHECK THE RADIO SYSTEM RANGE ON Move away from the max. distance you will drive the vehicle.
MAINTENANCE SLIPPER PAD REPLACEMENT It may be necessary to replace the slipper pad every 25 runs. It depends on how you drive and the type of terrain you drive on. If after consecutive adjustments you have motor problems, it is necessary to change the PADS. Remove the cover Loosen the Nylstop nut. Replace the slipper pad #C-00250-088 SLIPPER CLUTCH ADJUSTMENT m 3m Remove the cover Tighten or loosen the nut to have 3mm of visible shaft.
MAINTENANCE DIFFERENTIAL MAINTENANCE It may be necessary to replace the silicone oil every 50 runs. It depends on how you drive and the type of terrain you drive on. https://corally.com/Chemicals/Silicone-Oils/ Fill (75% MAX.) with silicone Diff. oil Remove the gearbox from the chassis. Open the gearbox to extract the differential. Open the differential. Remove the silicone oil. Refill with new silicone (5000cps) oil but not fully, (75% capacity max.
EXPLODED VIEW C-3003-30-08 (4x) C-3004-30-03 C-00250-013 C-71514 C-54010 C-3001-30-05 C-00250-060 C-3003-30-12 C-3003-30-14 C-3101-40 C-00250-012 C-3003-30-14 C-00250-008 C-3003-30-10 C-00250-090 C-00250-002 C-00250-088 C-54001 C-00250-007 C-3003-30-08 C-00250-037 C-00250-002 C-3102-40 C-3003-30-12 C-00250-005 C-52020 C-00250-078 1 C-00250-002 1 C-00250-006 C-3003-30-14 C-3004-30-03 C-00250-009 C-00250-069 C-00250-010 C-3003-30-08 C-3101-30 C-3102-40 C-00250-070 C-00250-001 - Cha
EXPLODED VIEW C-32151 (2x) C-00250-018 (2x) C-00250-071 C-35102 (4x) C-00250-075 (2x) C-00250-074 C-00250-073 C-3611-3-10-15-04 C-3003-30-12 (4x) C-3003-30-12 (4x) C-00250-074 C-00250-075 (4x) C-00250-075 (2x) C-00250-071 C-3003-20-10 (4x) C-00250-073 C-3611-3-10-15-04 C-00250-018 C-3003-30-12 (2x) C-00250-025 C-00250-020 C-00250-053 C-00250-087 C-00250-088 C-00250-041 C-00250-089 C-3001-30-05 1 C-00250-061 C-3003-30-10 (2x) C-3003-30-12 (4x) C-00250-066 C-00250-062 C-00250-081 C-002
SPARE PARTS 12 C-00250-001 Chassis - 2WD - Long Wheelbase - Composite C-00250-002 Chassis Covers - Composite C-00250-004 Chassis - 2WD - Short Wheelbase - Composite C-00250-005 Battery Brace Screw - 2 pcs C-00250-006 Battery Brace - 2S/3S Composite - 1 Set C-00250-007 Chassis Cover - Long Wheelbase - Front - Composite C-00250-008 Chassis Servo Cover Composite C-00250-009 Servo Saver - Composite C-00250-010 Ball - 5.
SPARE PARTS C-00250-059 Motor Guard - Rear - Composite C-00250-060 Gear Cover - Composite C-00250-061 Motor Mount Plate - Aluminium C-00250-062 Input Shaft - Slipper Shaft Steel C-00250-063 Drive Gear 13T - Metal C-00250-065 Idler Gear 19T - Metal C-00250-066 Stub Axle Pin - for input shaft - Steel C-00250-068 Hub - Rear - Composite - 2 Pcs C-00250-069 Wheel Shaft - Rear - Steel 2 Pcs C-00250-070 Drive Shaft - Rear - Steel 2 Pcs C-00250-071 Diff Gear - Metal - Diff Gear Cover - Composite - 34T -
STEEL SCREWS HEX FLAT HEAD SCREWS DIN 7991 - STEEL - 10 PCS HEX BUTTON HEAD SCREWS DIN 7380 - STEEL - 10 PCS C-3002-25-06 NOMINAL SIZE M2.5 LENGTH MM 6 C-3003-25-06 NOMINAL SIZE M2.5 LENGTH MM 6 C-3002-25-08 M2.5 8 C-3003-25-08 M2.5 8 C-3002-25-10 M2.5 10 C-3003-25-10 M2.5 C-3002-25-12 M2.5 12 C-3003-25-12 C-3002-25-16 M2.5 16 C-3002-25-18 M2.5 18 C-3002-25-20 M2.5 C-3002-30-06 NOMINAL SIZE HEX SOCKET HEAD SCREWS DIN 912 - STEEL - 10 PCS C-3000-25-06 NOMINAL SIZE M2.
NYLSTOP NUT - FLANGED ALUMINIUM - 10 PCS COLOR C-3107-30-0 NOMINAL SIZE M3 Gold C-3106-20-1 M2 Green Gold C-3101-20-6 C-3107-30-1 M3 Green C-3106-20-2 M2 Purple C-3107-30-2 M3 Purple C-3106-20-3 M2 Gun C-3107-30-3 M3 Gun C-3106-20-4 M2 Blue C-3107-30-4 M3 C-3106-20-5 M2 Red C-3107-30-5 M3 C-3106-20-6 M2 Black C-3107-30-6 M3 Black C-3106-30-0 M3 Gold C-3107-40-0 M4 Gold C-3106-30-1 M3 Green C-3107-40-1 M4 Green C-3106-30-2 M3 Purple C-3107-40-2 M4 Purp
WASHER FOR SOCKET HEAD SCREW ALUMINIUM - 10 PCS OUTSIDE DIAM. INSIDE DIAM. WASHER FOR BUTTON HEAD SCREW ALUMINIUM - 10 PCS WASHER FOR FLAT HEAD SCREW ALUMINIUM - 10 PCS ID MM 3.2 OD MM 10 COLOR C-3211-30-0 FOR B/H SCREW M3 ID MM 3.2 OD MM 8 COLOR C-3213-30-0 FOR F/H SCREW M3 Gold C-3211-30-1 M3 3.2 10 Green C-3213-30-1 M3 3.2 8 Green Purple C-3211-30-2 M3 3.2 10 Gun C-3211-30-3 M3 3.2 10 Purple C-3213-30-2 M3 3.2 8 Purple Gun C-3213-30-3 M3 3.
NOTE DECLARATION OF CONFORMITY EU-Konformitätserklärung/ Déclaration de Conformité UE (in accordance with ISO/IEC 17050-1) / (in Übereinstimmung mit ISO/IEC 17050-1) / (Conformément à la norme ISO/IEC 17050-1) Description : 1/10 Monter Truck 2WD - RTR Item Number: C-00250, C-00251, C-00252, C-00253, C-00254, C-00255, C-00256, C-00257 This declaration is issued under the sole responsibility of the manufacturer. Die alleinige Verantwortung für die Ausstellung dieser Erklärung trägt der Hersteller.
WWW.CORALLY.COM Team Corally is a registered trademark licensed to JSP Group Intl bvba • Geelseweg 80 • B-2250 OLEN • Belgium Tel: +32 14 25 92 94 • info@corally.
