Instructions for use

BATTERY
ESC
SERVO
RECEIVER
STEERING
SERVO
THROTTLE
SERVO
RECEIVER
BATTERY
4,8V - 6V
BATTERY
ESC
SERVO
RECEIVER
STEERING
SERVO
THROTTLE
SERVO
RECEIVER
BATTERY
4,8V - 6V
Remove the cover and insert 4 AA size batteries.
Observe the polarity markings and insert accordingly. Power ON the transmitter and check the Led status.
SOLID RED = OK
FLASHING RED = Low Voltage (Replace batteries)
1.5V - AA BATTERY 1.5V - AA BATTERY 1.5V - AA BATTERY 1.5V - AA BATTERY
Install the Receiver in your model using double-sided Velcro. Velcro will hold the receiver in place and protect it from
vibrations. Mount the antenna up and away from the vehicle in an antenna tube. The higher up the antenna is, the better
signal it will receive.
Install and connect the receiver, servos and other components in accordance with the “Assembly Precautions”.
CAUTION: NEVER CUT THE ANTENNA
CONNECTION WITH A ESC GAS POWERED MODEL
7
BATTERY INSTALLATION / REPLACEMENT
RECEIVER CONNECTION