Instructions for use

LITHIUM POLYMER BATTERY SAFETY PRECAUTIONS

LiPo Battery Charge Current (Ah)

Charging current should be less than maximum charge current speciﬁed in the Product

Speciﬁcation. Charging with higher current than recommended value may cause damage to cell

electrical, mechanical and safety performance and could lead to heat generation or leakage.

LiPo Battery Charging voltage (V)

Read the Product Speciﬁcation and respect the maximum voltage (4,2V/cell). Never charge

higher than 4,25V, which is the maximum voltage. Charging with a higher voltage will irreparably

damage the battery and may lead to the start of a ﬁre.

LiPo Battery Charging Temperature

The battery must be charged to an ambient temperature of 10°C~45°C.

Reverse Polarity

It is essential to observe the polarity. Reverse polarity (POSITIVE and NEGATIVE) will damage the

cells, cause the battery to swell and can damage your charger.

Discharging Current

The battery must be discharged at less than the maximum discharge current speciﬁed in the

battery instruction manual. High discharging current may reduce the discharging capacity

signiﬁcantly or cause over-heat.

Discharge Temperature

Environmental temperature : -20°C~60°C.

Over Discharging

Never discharge the battery cells below 3.2V.

When the battery is empty, recharge it immediately. Do not store an empty battery, the battery

will continue to discharge, it will fall below the minimum voltage and become unusable.

To prevent over-discharging, the battery shall be charged periodically to maintain between

3.6V and 3.9V. The High-performance charger are equipped with a device to prevent further

discharging exceeding a speciﬁed cut-off voltage.

LiPo Battery Storage

The batteries must be stored within -10°C~45°C range environmental condition.

If the battery has to be stored for a long time (+3 months), the voltage storage shall be a

3.6V~3.9V range. Always store your LiPo pack in a safe and non ﬂammable container away from

ﬂammable objects.

Handling of LiPo Battery

Take maximum care when handling and installing LiPo batteries made of ﬂexible aluminum

packaging in your model. These batteries are quickly damaged on sharp edges or spikes.