Instructions for use

ManualsBrandsCorally ManualsBuggy - Truggy - All Terrain RCMOXOO XP 2WD Truck 1/10th Brushless RTR Combo

LITHIUM POLYMER BATTERY

SAFETY PRECAUTIONS

Please Read these instructions carefully and especially if you are not

familiar with handling LiPo batteries. It is very important to observe

these instructions for your safety as well as that of other people and

property. Failure to comply with these operating instructions may re-

sult in a risk of ﬁre and serious injury and damage to property.

LIPO SAFETY BAGS

LITHIUM POLYMER BATTERIES

Summary of content (4 pages)

PAGE 1
LITHIUM POLYMER BATTERY SAFETY PRECAUTIONS LITHIUM POLYMER BATTERIES LIPO SAFETY BAGS Please Read these instructions carefully and especially if you are not familiar with handling LiPo batteries. It is very important to observe these instructions for your safety as well as that of other people and property. Failure to comply with these operating instructions may result in a risk of fire and serious injury and damage to property.
PAGE 2
LITHIUM POLYMER BATTERY SAFETY PRECAUTIONS NEVER Forget Take all necessary precautions before, during and after using the LiPo battery. You are responsible for the safe charge and use of your LiPo battery. LiPo Battery Charge Safety Precautions • Always follow the manufacturer’s safety instructions • Use only a charger designed for charging LiPo batteries. Never use any other type of charger. • When charging a LiPo battery always use LiPo Safety Bag (Flame retardant).
PAGE 3
LITHIUM POLYMER BATTERY SAFETY PRECAUTIONS LiPo Battery Charge Current (Ah) Charging current should be less than maximum charge current specified in the Product Specification. Charging with higher current than recommended value may cause damage to cell electrical, mechanical and safety performance and could lead to heat generation or leakage. LiPo Battery Charging voltage (V) Read the Product Specification and respect the maximum voltage (4,2V/cell).
PAGE 4
LITHIUM POLYMER BATTERY SAFETY PRECAUTIONS Never drop this type of battery, it will be deformed and we advise you never to try to charge a deformed battery as this may cause swelling, leakage and even fire. Soldering Connectors Use a soldering iron where the temperature can be controlled. The temperature must not exceed 350°C and the time must not exceed 3 seconds. Perfectly isolate all electrical connections from the battery circuit.