Owner`s manual

10
DISCONNECT
LIFT
UP
LIFT
UP
COOLING FAN REPLACEMENT
SAFETY: Turn off all power switches and unplug
light fixture from power supply.
CAUTION: Let the unit cool down completely
before handling.
Cooling Fan Replacement
1. Once completely cool, remove fixture from
the aquarium and place on a non-abrasive,
flat surface.
2. Press in cooling fan cover tabs from top of
fixture and lift cooling fan from fixture.
(fig. F2)
3. Locate cooling fan quick-disconnect wire
and disconnect from fixture (fig. F3)
4. Reconnect quick-disconnect wires and
insert cooling fan into fixture.
PRESS
IN
PRESS
IN
Cooling
Fan Tab
Cooling Fan
Cooling
Fan Tab
Air Vent Cooling Fan
fig. F1 - Front View of Fixture
fig. F2 - Removing Cooling Fan
fig. F3 - Quick Disconnect