Specifications

Daily
A . Nozzle Check:
a. Tape down a piece of blank paper on the flatbed
b. Press button to get the PrintMasterBackwards into “Ready to print” mode
g. If Nozzle Check print is irregular (missing dots, bending, and/or blurry), run a head
cleaning
B. Head Cleaning:
a. Printers and Faxes Method:
1. Power on the printer
2. Go to “Start” and open “Printers and Faxes”
3. Right-Click on “Epson Stylus Photo R230” and select “Printing Preferences”
4. Click on the “Mai ntenance” Tab
5. Click “Hea d Cleaning”
C. If print result still isn’t perfect, try head cleaning 3 more times
D. If print result is still not good, refer to the workflow section for ink flow issues
Weekly
A . Capping Station Cleaning:
a.
b.
Disconnect the mains power supply
c.
d.
Manually move the head to the middle to expose the capping station
Fill syringe with cleaning solution (provided)
Squirt the solution all over both pads in the capping station, as seen in the picture below.
PrintMaster Monet.
Maintenance.
c.
Go to “Start” and open “Printers and Faxes”
d. Right-Click on “Epson Stylus Photo R230” and select “Printing Preferences”
e. Click on the “Mai ntenance” Tab
f. Click “Nozzle Check”
9.
e. Manual move headback to Capping Station
f.
g.
Fully power on the printer
Run a head clean