User manual

COPYTRAX TECHNOLOGIES MONET 5000 Pro & Pro-Recorder
May 2005 www.copytrax.com 5
Power on switch
and Power LED
Power Button and - LED
With the Power Button you can switch the printer on and off.
After pressing it takes a couple of seconds until the printer becomes ready.
The Power LED blinks when printing data is being processed.
Caution!
Always use the Power button to turn on or off.
Using a power strip, surge protector, or a wall-mounted switch to turn the printer on and
off may cause printer failure.
Switch for opening and closing the printer tray
Press the Resume Button for 2 sec. ( see page 6 ) to open the tray for putting discs into
the tray or getting discs from the tray. On the same way you can close the tray.