User manual

COPYTRAX TECHNOLOGIES MONET 5000 Pro & Pro-Recorder
May 2005 www.copytrax.com 47
4.2 Printer-LED’s are on or flashing
4.2.1 Functions of LED’s
Printer-LED’s display the printer status.
4.2.2 Print Cartridge-Status LED on or flashing
Top Cover is open
Close Top Cover
This may be a problem with a print cartridge
Verify that the correct print cartridges are installed.
Check if a print cartridge is low on ink or improperly installed.
4.2.3 Resume-LED flashing
There is a print job available in the spooler.
Please put a disc onto the drawer and press the Resume button.
The drawer will be moved in and the printing starts.
4.2.4 Power-LED flashing
Printer prepares to print
The LED stops flashing when the printer has received all data.
4.2.5 All LED’s are flashing
The printer may need to be restarted
Press the power button, to turn off the printer, then press the power button to restart the
printer.
If flashing of LED’s continues:
Press the power button, to turn off the printer.
Disconnect printer from the power source.
Reconnect printer to the power source.
Press the power button, to turn off the printer.