Specifications

DaVinci Pro 6-6 CD printer.
Connection and software installation .(Windows)
1. .
Connect the USB cable to your PC
Connection
.
Connect the mains plug to the mains supply.
If the printer comes on when you plug in the
mains cable by pressing the
on/off button.
After connecting the printer and PC you need
to install the printer driver from the CD-ROM.
turn it OFF
2. Installing the printer driver.
A. Make sure that printer is off, then turn on
your computer. Turn off any virus protection
software and cancel any set-up wizard or the
‘New hardware found’ window if it has
opened.
B. Insert the printer software CD. If the
Installer dialog box does not appear click on
‘my computer’, click on the CD rom icon, then
click ‘open’. Then double-click on
Autorun.exe.
C. Click ‘Install Printer Driver’. Then click on
the relevant driver for your Windows
Operating System. It will be a 32-bit or 64-bit
system. If you are unsure consult the
properties within ‘My Computer’.
D. Select ‘Setup’.
E. Select ‘OK’.
F. Follow the onscreen instructions to
complete the installation.
G. The Stylus pro 1400 printer will
automatically be installed in your windows
printer list & assigned a unique USB port.
The printer is now installed.
ON/OFF