Specifications

DaVinci Pro 6-6 CD printer.
Discus Setup.
1. .
Discus label software (and Quicktime if
required) is located in the following location
on the software CD:
Autoplay/Programs/Discus v4.22 LE.
When Discus is run for the first time It will
prompt for a serial number. This number is
made up of three sets of three digits. This
number can be found on the CD face. Enter
the serial number to continue.
Click choose layout to select the first
template.
In the ‘Choose a kind’ menu, select CD/DVD
& in the ‘Choose a Layout’ menu select
Copytrax Da Vinci pro 6-6. You will see a
thumbnail image of the 6 disc tray on the
right.
Click OK.
You can now see the Print window showing
the layout of the 6 disc’s. Each disc can be
made Print or Non Print by double clicking on
the tick box in the centre of each disc.
At the bottom left you will see the adjustable
sliders for the outside & inside diameters of
the print mask. The four arrows allow for fine
adjustment of the whole template printing
position as due to manufacturing tolerances,
each printer will differ slightly so some
adjustment may be needed. These settings
will be held for future printing & can be
adjusted at any time.
Discus Installation
Windows.
MAC.
Quicktime is required to run Discus label
software. It is included should you need it.
Select ‘Install Quicktime’ before installing
Discus.
Insert the printer software CD. (If the
installer dialog box does not appear click on
‘my computer’, click on the CD rom icon, then
click ‘open’. Then double-click on
autorun.exe).
Select ‘Install Discus Label Software’.