Version 1.0 26/09/2012 First Release JR Version 1.1 18/01/2013 Updated JR Version 1.2 20/02/2013 Updated JR Version 1.
WARNING To avoid electrical shock hazard s, unit covers should only be removed by authorised personnel. © COPYRIGHT This document is the property of Copytrax Technologies UK Ltd and it may not be reproduced, copied or exhibited without permission from Copytrax. ENVIRONMENTAL PROTECTION Waste electrical products should not be thrown away with household waste. Please recycle where facilities exist or call us and we can arrange collection (Uk only) and disposal.
DaVinci Pro 6-6W CD printer. Contents. Unpacking. Preparing the ink Tanks. Installing the ink system. Setting up. Space to work. Connecting the cables. Fitting the input guide. Fitting the output support. Connection and software installation(windows). Connection. Installing the printer driver. Connection and software installation(Macintosh). Connection. Installing the printer driver. Printer installation. Control panel functions. Discus setup Discus installation. Discus Quick start Quick start.
DaVinci Pro 6-6W CD printer. Unpacking. Input guide Printer Output support Bulk ink system (CISS)* Already fitted CD tray Packing checklist USB cable Mains cable User manual Printer driver Image software** Reset Utility 1. Unpacking. Prepare a clean area of desk space to unpack the printer parts. Check that all of the parts shown are included in the box. Note. *Ink system design may vary from picture. **Free bundled image software may vary, depending on stock at time of order/shipping.
DaVinci Pro 6-6W CD printer. Ink System Installation. 1 2 Foam packaging removed ready for ink installation. 3 Carefully lift the supply bottles out of the cradle. 4 Remove the bubble wrap from the supply bottles. Peel off the packing tape from the top of the supply bottles . 5 6 7 8 Make sure all plugs are closed. Tip the supply bottles forward to fill the front compartment with ink .
DaVinci Pro 6-6W CD printer. Ink System Installation continued. 9 10 The rear section of the supply bottles should now have a small air gap (necessary for normal operation). 11 Open the smaller plugs for each colour. 12 Insert the six supplied air filters. 13 Open the top lid of the printer and remove the packing tape from the top of the cartridges. 15 Place the supply bottles back into the cradle 14 Connect the power lead to the printer and press the power button on the keypad.
DaVinci Pro 6-6W CD printer. Ink System Installation continued. 18 17 The cartridge carriage will stop in the ‘change cartridge’ position. Carefully lift the six cartridges. 20 19 Tip the six cartridges as shown above. Move the six cartridges to the left of the carriage and remove the two strips of packing material. 22 21 Refit the six cartridges into the carriage 23 When each cartridge is installed properly the clips are locked in place.
DaVinci Pro 6-6W CD printer. Setting up. Output support 1. Space to work. Prepare an area of desk space to set up the printer. A space of 135cm wide x 62 cm deep is required. 1 Input guide The desk should be stable and level, in a place free from dust, humidity, movement, vibrations and away from direct sunlight. Place the printer in the centre of the desk space with the control end of the printer nearest the front of the desk.
DaVinci Pro 6-6W CD printer. Connection and software installation .(Windows) 1. Connection. Connect the USB cable to your PC. Connect the mains plug to the mains supply. If the printer comes on when you plug in the mains cable turn it OFF by pressing the on/off button. ON/OFF 2. Installing the printer driver. After connecting the printer and PC you need to install the printer driver from the suppled DVD. A. Make sure the printer is off, then turn on your computer.
DaVinci Pro 6-6W CD printer. Connection and software installation continued (Windows). E. Only check the boxes for ‘Epson Driver and Utilities’ and ‘Epson Network Utilities’*. Uncheck all other options before selecting ‘Install’. F. The installation will now begin. If your PC is connected to the internet the latest driver will be found and downloaded. The time this process takes will depend on your network speeds. G. Select your desired connection type and select ‘Next’.
DaVinci Pro 6-6W CD printer. Connection and software installation continued (Windows). H. Select ‘Yes:First time setup’ and and ‘Next’. Follow the onscreen instructions to complete the installation. I. Select ‘Finish’ to complete the installation. Printing the test page is not necessary, but should you wish to do so place a piece of paper on the print tray before loading it into the printer. For printing instructions refer to the ‘Printing’ section of this manual. J.
DaVinci Pro 6-6W CD printer. Connection and software installation .(Macintosh) 1. Connection. Connect the USB cable to your mac. Connect the mains plug to the mains supply. ON/OFF If the printer comes on when you plug in the mains cable turn it OFF by pressing the on/off button. 2. Installing the printer driver. After connecting the printer and mac you need to install the printer driver from the DVD-ROM. A. Make sure the printer is off, then turn on your Macintosh. Turn off any virus protection software.
DaVinci Pro 6-6W CD printer. Connection and software installation continued .(Macintosh) 3. Printer Installation. Once the driver installation is complete the printer connection window will appear. ON/OFF Turn on the printer by pressing the power button on the front of the printer. Click ‘Next’. The next window gives you instructions on how to add a printer to the printer list. The printer list should be open on the desktop. Click ‘Add’. This will open the printer browser window.
DaVinci Pro 6-6W CD printer. Control panel functions. On/Off button A. Used to turn the printer on and off. B. Used to clear the printers memory if pressed twice while the printer is on. Printer status indicator light. A. On solid GREEN when the printer is on but inactive. B. Flashing GREEN when the printer is active. WiFi button (for use with WPS push button compatible routers) Press the WPS push button on your router. Press and hold WiFi button for three seconds.
DaVinci Pro 6-6W CD printer. Discus Setup. 1. Discus Installation. Windows. Insert the printer software DVD. (If the installer dialog box does not appear click on ‘my computer’, click on the DVD rom icon, then click ‘open’. Then double-click on autorun.exe). Select ‘Install Discus Label Software’. Quicktime is required to run Discus label software. If it is not already installed on your PC the installation for Quicktime will start. MAC.
DaVinci Pro 6-6W CD printer. Discus Quick Start. 1. Quick Start. Open Discus & select the Copytrax Da Vinci pro 6-6W template. Click on the ‘Canvas’ Tab top left of the window. To choose a background from the default supplied images, click the ‘Show all’ button bottom left. Scroll through the pages & select the desired image. You will now see the selected image in the disc area of the main screen. Text, Symbols etc can be added by selecting the tabs to finish the design.
DaVinci Pro 6-6W CD printer. Discus Image Import. 1. Importing an Image into Discus. Open Discus print software & select the Copytrax Da Vinci pro 6-6W template. Click on the ‘Photo’ tab top left. Click the ‘Add’ button to bring up the ‘Open’ dialogue box. Supported image formats are: BMP, GIF, JPG, PCT, PNG. Select your image & click ‘Open’. Your image will now be displayed in the printable area. Resize if needed & drag the image into place. Click the ‘Print’ tab to show the 6 disc tray layout.
DaVinci Pro 6-6W CD printer. Printing Quick Start. 1. Quick Print Setup. This section is a Quick guide to demonstrate the printing process from the supplied Discus’s software. Your design should already be created in Discus, when you are ready to print click the Print button. In the Print window select the Stylus Photo 1500 printer. Click ‘Preferences’. A Printing Preferences window will open.
DaVinci Pro 6-6W CD printer. Printer settings Windows (Advanced). 1. Changing the printer settings for CD printing. In the Windows control panel select Printers and Devices. Select the Epson Stylus Photo 1500, right click and select Printer Properties. In the window type ‘DaVinci Pro 6-6W’ and click OK. Select the DaVinci pro 6-6W and right click and select Printing preferences 2. Optimizing print quality. Enter the advanced section of the Printer preferences.
DaVinci Pro 6-6W CD printer. Printing Software & Template. 1. Image software. Discus Discus is a high quality dedicated software package for printing CDs and Jewel case inserts etc. It is supplied with your printer. It is very easy to use and we offer telephone support should you need it. It is also possible to create images and print CDs using other graphics programmes. For example; Corel Draw, Adobe Photoshop, Adobe Illustrator etc.
DaVinci Pro 6-6W CD printer. Printing CDs. 1. Positioning the CD tray. Place the empty CD tray onto the input guide. The silver strip on the tray is positioned towards the printer and the cutouts for the CDs to the top of the tray. 1 The tray fits between the 6 nylon guide blocks and should run freely between them. 2. Loading the tray with CDs. Silver Strip CDs are loaded into the tray after it has been positioned on the input guide.
DaVinci Pro 6-6W CD printer. Ink Filling. Ink Filling 1 2 You will need: Copytrax CD printer refill ink (dye based). Protective gloves & goggles. 3 4 Remove the top from the refill bottle(1) & fit the supplied nozzle(2). Cut the top of the nozzle off with a sharp knife(3) to allow the ink to flow. Refilling can be done with the ink tank in its tray. Pull the front coloured stopper from its hole(4) & carefully refill with Copytrax CD printer ink(5). Refit the stopper before use.
DaVinci Pro 6-6W CD printer. Error Indications. If you experience a problem with your printer refer to the table below to identify and resolve the issue. In most cases this will be sufficient to regain full operation. If you are not able to resolve the issue with the help on this page please contact your supplier quoting the LED sequence on the keypad and the status monitor message from your PC/MAC.
DaVinci Pro 6-6W CD printer. Warranty & Support. COPYRIGHT © Copytrax Technologies UK Ltd. 2008. All rights reserved. This manual and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the written permission of Copytrax Technologies UK Ltd.
