Specifications

The Power light is on and the Resume light blink

The printer is out of media

• Delete the print job with the Cancel button X, put a disc

into the tray and send the print job again..

The Power light and the Resume light are on

The service cover is open or not closed correctly

• Close the Service cover.

The Power light is on, and one or more of the print head lights blinks

One or more print heads are missing

• Install the print head indicated, and print again.

The Power light, and one or more of the print head lights blinks

One or more print heads are faulty or need attention

• Ensure the print head indicated is properly installed,

then try to print again.

• If the error persists, replace the print head indicated.

The Power light is on, and one or more of the cartridge lights blinks

One or more cartridges are missing, or empty

• Install the cartridge indicated, and print again.

• If the error persists, replace the cartridge indicated.

The Power light blinks, and one or more of the cartridge lights blinks

One or more cartridges are faulty or need attention

• Ensure the cartridge indicated is properly installed,

then try to print again.

• If the error persists, replace the cartridge indicated.

The Power light blinks, and one or more of the cartridge lights are on

• One or more cartridges are low on ink (less than 20 to

25 %)

• No action required.

The Power light on, and one or more of the cartridge lights are on

• One or more cartridges are low on ink (less than 20 to

25 %)

• No action required.

All lights are on

non-recoverable error has occurred

• Disconnect all cables (such as power cord, network

and USB cable). Wait about 20 seconds and recon-

nect the cable.

• If the problem persists, contact your service provider.

Troubleshooting