Specifications

77
Rear side
On the rear side of the printer (on the left side) are the connectors for the
power cord and the USB cable.
Rear side - left corner
On the rear side of the printer (on the right side) is a 6 pin Mini DIN connec-
tor (PS/2) to connect the printer to the autoloader.
Rear side - right corner
1.2 Description of the control panel
Power switch and LED
With the Power Button you can switch the printer on and off. After pressing the power button, you have
to wait up to 2 minutes, until the printer has finished his initialisation. The Power LED blinks when print-
er is busy and printing data is being processed.
Open / Close tray
When you press this button you can open and close the printer tray.
Cancel
When you press Cancel button you can cancel the actual print jobs.
Resume
The Resume LED is blinking, when there is a print job, but no media in the tray. The print job has to
be cancelled with the Cancel button (X). Put a disc into the tray and send the printing data again.
This LED is blinking also in the case of an error. Together with green power LED it will show an error code. Please
refer to section Appendix in this manual.
Head Status LEDs
When this LED is blinking, the printer is not able to print. He cannot react to commands from outside.
Moving the tray is not possible and also the Tool „Printer Service Terminal“ is no longer working. You
have to bring the printer out of this error state first, before you can continue.
Printer