Specifications

Disc Manager
A.4 DMS structure
[GENERAL] - main body
NAME - name of the Job
COPIES - number of copy
INPUTBIN - 1-4 .. No. of the input bin (default is 1 - the first input bin)
OUTPUTBIN - 1-4 .. No. of the output bin (default is 1 - the first output bin)
STATUS - status of a Job
ERROR - description of error which occurred during the running the Job
[RECORDING] - parameters for recording
IMAGE - image name (if is inserted without the path then must be in the same folder as the DMS file)
DIRECTORY - folder for recording (you can use IMAGE or DIRECTORY, they don´t be use together)
VOLUME - name of the disc when the DIRECTORY is use
SPEED - recording speed (default = max.)
ERASE - 0/1 .. erase disc before recording? (default = 0)
VERIFY - 0/1 .. check the data after recording? (default = 0)
SIMULATION - 0/1 .. recording simulation? (default = 0)
[PRINTING] - parameters for printing
LABEL - name of printing file (if is inserted without the path then must be in the same folder as the DMS file)
MERGE - specify file contains an external texts for DML or BTW
BEFOREREC - 0/1 .. printing before recording? (default = 0)
SIMULATION - 0/1 .. printing simulation? (default = 0)
Job status and error:
[GENERAL] - main body
STATUS - status of the DMS script
ERROR - description of the error code
STATUS: 0 .. wait on a new file for Disc Manager
1 .. Disc Manager found DMS file
2 .. Job was add into Job Scheduler
3 .. Job is running (recording and printing)
4 .. Job finished
10001 and more.. error codes
STATUS=10001 - error = missing image for recording
STATUS=10002 - error = missing image for printing
Input and output bins:
[GENERAL] - main body
INPUTBIN - 1-4 .. No. of the input bin
OUTPUTBIN - 1-4 .. No. of the output bin
In this case is necessary set bins into Individual Bin Mode, see at the zásobníků, viz kapitola 4.2.1 part Setup
Numbering of input bins Numbering of output bins
Disc Manager - Appendix
74