Specifications

Disc Manager
19.7 How to run a Job
1. To run the Job must be inserted at least one Job in the Job Scheduler window
2. When inserting more of Jobs - you will increase its priority
3. Click the mouse to select the Job you want to run first
4. Click by mouse to Arrow Upbutton to increase the priority (preference) or the Arrow Downbutton to decrease
the priority (delay) in the Job Scheduler window
5. Click the Start button on the Toolbar to start all inserted Jobs. Next Job will be executed after the first Job finish.
TIP: After running, the Jobs are running from top to bottom as they are listed. If you need to increase or decrease
priority for one Job (or more Jobs), you can change its priority by clicking the Arrow Upbutton to increase the pri-
ority (preference) or the Arrow Downbutton to decrease the priority (delay), right in the Job Scheduler window.
TIP: When you start the Job you will info about Jobs in the Job Schedulerwindow - the number of copy, the process
and finish the job. When you insert the Job is displayed in black. When Job is running then will change colour to
red. When finished, it will change colour to gray.
TIP: Keep CD or DVD discs in the input and output bins while process. Duplicator continuously remembers the
number of disks in these bins. If you remove any discs during running a Job the some problem became. The dupli-
cator does not recognise the level of filling bins. So it may happen that the duplicator will drop discs into the out-
put bin from height. To reset the position of all bins to the default values, do it in the Run --> Reset bin positions
when the Disc Manageris idle.
19.8 How to delete a Job
To better the summary of inserted Jobs you can delete the Job in Job Scheduler window. You can not delete a task
that is running.
1. Click on the Job that you want to delete to highlight it
2. Click the Delete button in the right part of the Job Scheduler window, deleting it
19.9 How to edit a Job
You can edit the number of copy and recording speed with the inserted Jobs in the Job Scheduler window. In the run-
ning Jobs can be change the number of disks but partially only. Unable to set a smaller number than has been done.
1. Browse the Job and click to select
2. Click the Edit button in the right part of the Job Scheduler
3. Enter the number of copy
4. Choose the recording speed, we recommend the 32X for data and 24X for Audio. For DVD please setup record-
ing speed according to used media but you use recording speed lower than maximum
5. Click OK to insert the modified Job back to the Job Scheduler
19.10 How to copy a Job
If you need to run a Job again, which is already finished, and is still in the list of Job Scheduler, you can simply
copy, modify and run again.
1. Click to highlight the finished Job
2. Click the Copy button on the right in the Job Scheduler window
3. In the Job Scheduler window appears copy of the Job
Now, you can click the Start button on the toolbar to run the inserted Job, or click on the Edit button on the right side
of the Job Scheduler window modify this job. You can specify the number of copy or change the recording speed.
Disc Manager - How To
69