Specifications

Disc Manager
19.4. How to create Job for print only
To create a Job for printing must be prepared in advance of printing the print file (with extension *. PRN). The print
file is created in a graphics program which you use. If you are using a graphics program Label Designer then to
obtain a print file follow the instructions in the Label Designer user manual. To create a print job, you can use
graphics files directly from the Designer Labeland do not create a print file. This file has the extension *. DML.
1. Click on the icon you start Disc Manager
2. Check your hardware and click OK, see chapter 8.1
3. On the toolbar, click on the Job Editor icon
4. Click on the Add for create a new Job, see at the chapter 4.2.1.
5. Enter name of Job
6. Click to Printing bookmark
7. Enable printing (Make tick in small box before Enable Printing)
8. Browse in the HDD and select the printing image (with extension *.PRN or *.DML)
9. Click on the OK you create a Job for printing only
19.5 How to create Job for printing and recording
To create this Job must have a pre-prepared image in accordance with Chapter 19.3 and 19.4 and the previous-
ly created print file has the extension *. prn. The print file is created in a graphics program you use. If you are
using a graphics program Label Designer then to obtain a print file follow the instructions in the Label Designer
user manual. To create a print job, you can use graphics files directly from the Designer Labeland do not create a
print file. This file has the extension *. DML.
1. Click on the icon you start Disc Manager
2. Check your hardware and click OK, see section 8.1
3. Click on the icon Job Editortoolbar, you run the program
4. Click the Add button to create new Job, see. Chapter 4.2.1
5. Enter the name of the Job
6. Click the Recordingbookmark
7. Enable recording (Make tick in small box before enable recording)
8. Browse in the HDD and select the recording image (with extension *.NRG or *.ISO)
9. Enable verification file (Make tick in small box before Verify after recording)
10. Enable Burn Proof (Make tick in small box before Activate Burn Proof)
11. Choose the recording speed, we recommend the 32X for data and 24X for Audio. For DVD please setup record-
ing speed according to used media but you use recording speed lower than maximum
12. Click to Printing bookmark
13. Enable printing (Make tick in small box before Enable Printing)
14. Browse in the HDD and select the printing image (with extension *.PRN or *.DML)
15. Click on the OK you create a Job for recording and printing
19.6 How to insert a Job
To insert a Job into the Job Scheduleryou must have pre-prepared Job in accordance with Chapter 21.3 to 21.5.
1. Click the Add button in the right part of the Job Scheduler window
2. Browse the required Job and click to select
3. Enter the number of copy
4. Choose the recording speed, we recommend the 32X for data and 24X for Audio. For DVD please setup record-
ing speed according to used media but you use recording speed lower than maximum
5. Click OK to insert the job into the Job Scheduler
Disc Manager - How To
68