Specifications

Disc Manager

7. Setup

This menu makes it possible to settings automatic duplicator when is connected.

Hardware Settings - Settings of your autoloader, recorders and printer

Software Options - Variable adjustments

ARC - Tool for automatic duplication from directory

Registration - Shows registration dialog for insertion the license key

and owners data

7.1 Hardware Settings

First the most important thing you have to do you must

conﬁgure your hardware. Click by mouse to menu: Setup

-> Hardware Settings to open hardware conﬁguration

window. There are three types of devices which you must

conﬁgure. Your autoloader, your recorders which you

have connected and printer.

Enable autoloader - Click by mouse to a little window you

enable autoloader. If is disable (without check mark) then

you can use the Disc Manager in manual mode. In manu-

al mode is disabled printer and you have allowed jobs only

with recording and without printing.

Autoloader COM port - serial port for control automatic

duplicator. You must set No. of serial port which is used

for communication with your loader.

Autoloader Type - you must select type of your

autoloader. At this moment is supported Gamma, Samurai,

Alpha, Omega, Delta, Shuttle and Printer autoloader. For

more info contact Copytrax .

Autoloader Bin Mode - here are exist three possibilities:

Standard input and output bin - for duplicators with one input an one output bin. E.g.: Alpha, Omega, Gamma 2

Sequential control of bins - for duplicators with double input and output bins. At the beginning the you ﬁll bins (1),

(2), and (3) by CD/DVD disks. See pictures on the next page. Autoloader loads from bin 1 and unloads to bin 4.When

the bin 1 is empty loader goes to bin 2 and loads from it and unloads to emptied bin 1. When bin 2 is empty load-

ing is from bin 3 and unloading to bin 2. Loader reports error after the last input bin 3 is empty.

Individual mode control - for duplicators with double input and output bins only. Two independent input bins and

two independent output bins. This is special mode which must be supported by the control system. Input bins are

on the left (1), (2) and output bins (3), (4) are on the right side.

Disc Manager