Specifications

Disc Manager

6. Start

Start - Runs duplication process

Stop - Stops duplication process after ﬁnishing already started discs

Abort - Stops process as soon as possible. If disc is recording it will destroy this disc

Reset Autoloader - This is for calibration loader for its default position

Reset Bin Positions - Loader will forget levels in each of bins and set these levels to

default values

6.1 Start

Insert empty CD or DVD discs (blank or printable discs) into input bins. Add job into Job Scheduler- see

chapter 5.3 Add a new Job and click by mouse to Start button on the toolbar or from menu Run->Start or

from keyboard Alt+U+S. The Disc Manager starts the duplication until all jobs have been done or the user

stops the process. Jobs are process from top to bottom. A job is done when all discs have been produced.

6.2 Stop

You can stop job when is running. Click by mouse to Stop button or from menu Run->Stop is for interrupt

production process. This function does not destroy any disc, because duplication process is stopped after

already begun CD or DVD.

6.3 Abort

You can Abort job when is running. Click by mouse to Abort button or from menu Run->Abort to stops

duplication process as soon as possible. If there are discs in the recorders and burning is proceeded,

then these discs are destroyed and puts into reject bin. This function stops the production process imme-

diately. If there is disc in a printer and printing is proceeded, then this disc will stop after print is ﬁnish.

6.4 Reset Autoloader

It makes software reset of the loader for set its default position. Click by mouse to menu: Run -> Reset Autoloader.

Lifter will move to the left side and next to the right side and stops in its default position.

6.5 Reset Bin Position

You can set default head position for all bins. Click by mouse to menu: Run -> Reset Bin Position head will forget

levels in each of bins and set these levels to default values.

Tip: Don't manipulate with CD or DVD in input and output bins during the duplication process. Disc Manager

remembers number of discs and positions where it picks last disc. And if you take some disc from the output bin

during work the autoloader cannot ﬁnd out new proper position. So, if you take some disc from the output bin the

autoloader will putting them from high.

Disc Manager